If you have estimated the heat loss for both power and energy and know what flow temperature you wish to use you can skip room by room heat loss calculation and go straight to the design calculations for your chosen technology. 

On the Survey page you have the ability to enter the calculation method manually. You may enter the data into this field as long as you know the Annual Heat Demand and the Building Heat Loss in kW. 

If you do not have the ability to estimate the heat loss requirements you can use the building calculations functions for room by room but enter floor by floor. This will speed up the data entry completing the tabs on a floor by floor basis. 

Remember, if the estimate is accepted by your customer, it is an MCS requirement that you will do a full room by room heat loss calculation for Heat Pumps and Biomass. 

For any further questions please speak to your Mentor on Freephone 01244 784 260 or email [email protected]