When using Underfloor Heating (UFH) you would select from the underfloor options that ties in with your chosen installation. When adding a new inventory item, you would put in the description the type of pipe and the pipe spacing distance too.
For example: 200mm spacing Pert-Al-Pert Underfloor Heating Pipe. Please remember to use the heat emitter guide when deciding your pipe spacing for your underfloor heating. When Underfloor heating is selected, the Output at MW-AT 50 will show as “n/a” and the correction factor will show at “0.1”. The Output at Flow will also show as 0 as the Output at flow value is specific for radiators only.
For any further questions please speak to your Mentor on Freephone 01244 784 260 or email [email protected]